Water Testing
Instruments.
Instrument families covering a treatment plant end to end: what is in the water, how much of it is moving, and how much is left in the tank.

One electrode,
or the whole loop.
Start with a single parameter on a bench and scale to a multi-parameter panel driving dosing control and a compliance report.
Single Parameter Analyzers
One parameter, one controller. pH, conductivity, dissolved oxygen, COD, BOD, turbidity or residual chlorine.
View the range
Multi Parameter Analyzers
The AI-1000 reads a full water profile on one 7-inch touchscreen and pushes it straight to the cloud.
View the range
Online Water Analyzers
AI 1000 multi-channel controllers that manage the probes, guide calibration and report continuously.
View the range
Flow Meters
Electromagnetic, battery-operated electromagnetic, liquid turbine and vortex meters with compensation.
View the range
Level Meters
Radar, ultrasonic and submersible level measurement, plus transmitters, indicators and switches.
View the range
From the intake to
the discharge point.
The same instruments run on raw water, process water and effluent, which is why one supplier can cover the whole plant.
One standard,
every electrode.
The display, the sealed enclosure, the electrodes and the relay control are specified together, so the calibration holds across the whole assembly rather than one part of it.
What the analysers
actually measure.
| Parameter | Typical range | Where it is used |
|---|---|---|
| pH | 0 to 14 pH | Dosing control, effluent compliance |
| TDS / Conductivity | 0.02 µs/cm to 20 ms/cm | Process water, RO and boiler feed |
| Residual chlorine | 0–2.0 or 0–20.0 ppm | Drinking water and disinfection |
| Turbidity | 0–4.000 to 0–400.0 NTU | Filtration performance, clarifier outlet |
| Dissolved oxygen | Sensor dependent | Aeration tanks and biological treatment |
| COD & BOD | Sensor dependent | Effluent load and treatment efficiency |


Send us your water spec.
Parameter, range, line size and mounting. We will come back with the analyser, the electrodes and the calibration plan.