Online Water
Analyzers.
The AI 1000 series are multi-channel controllers that manage the probes rather than just reading them. The display guides calibration and configuration, so the instrument is serviceable by the plant.

Continuous water-quality monitoring for effluent, process and drinking-water lines.
- pH / ORP
- TDS / Conductivity
- Turbidity & Chlorine
- Cloud & SCADA
Complete management
of the probes.
A high-resolution, high-contrast display that stays readable in a dark plant room, four independent push buttons and infrared remote control. Three operating modes cover automatic running, manual measurement and simulation for loop checking.
What each channel
will read.
TDS range follows the electrode constant, so the same controller covers deionised water through to brine by changing the probe.
| Parameter | Range |
|---|---|
| pH | 0 to 14 pH |
| TDS, 0.01 electrode | 0.02 – 20.00 µs/cm |
| TDS, 0.1 electrode | 0.2 – 200.0 µs/cm |
| TDS, 1.0 electrode | 2 – 2000 µs/cm |
| TDS, 10.0 electrode | 0.02 – 20 ms/cm |
| Residual chlorine | 0 – 2.0 or 0 – 20.0 ppm |
| Turbidity | 0 – 4.000, 0 – 40.00 or 0 – 400.0 NTU |
| Display | OLED or LCD |
|---|---|
| Accuracy | ±5.0 % FS |
| Repeatability | ±1.0 % FS |
| Ambient temperature | −20 °C to 60 °C |
| Analog output | 4–20 mA, 750 Ω load |
| Alarm output | Double relay |
| Digital output | RS485, Modbus RTU |
| Power supply | AC 220 V ±10 % or DC 24 V |


Which electrode constant?
Tell us the conductivity range you expect and we will match the electrode to it, then quote the controller around it.
