Air Monitoring
Instruments.
Instrument families covering the air side of a plant: what leaks into the workspace, what leaves through the stack, and what the fence-line monitor reports to the board.

Point detection through
to the whole stack.
Each family has its own page with models, detection ranges and the specifications your consultant will ask for.
Fixed Gas Detectors
Permanently installed detectors for toxic and combustible gases, in flameproof housings for hazardous areas.
View the range
Portable Gas Detectors
Handheld single and multi-gas instruments for confined-space entry, leak surveys and permit-to-work checks.
View the range
Gas Monitor Systems
AI-50 control panels that gather field detectors into one alarm and relay system, with sounders, interlocks and a single view for the control room.
View the range
CEMS
Continuous emission monitoring for regulated stacks, covering sixteen gases with CPCB and cloud connectivity.
View the range
Online SPM
Laser backscatter dust monitoring for stacks and ducts, standalone or networked with multiple monitors.
View the range
Ambient Air Quality
Fence-line and community stations logging particulate and gaseous parameters around the clock.
View the range
Weather Monitoring
IP66 automatic weather stations recording wind, rainfall, radiation, pressure and dew point alongside air data.
View the rangeDetectors leave here
already gas-tested.
Every unit is calibrated against test gas on our bench before it is packed, and the certificate travels with it.
The instrument is
the easy part.
Calibrated before dispatch
Every detector is gas-tested and calibrated on our bench, with the certificate in the box.
Rated for the area
Flameproof and weatherproof enclosures specified for the zone and the gas group.
Ready to log
4–20 mA, relay and Modbus outputs that drop into your DCS or our IoT logger.
Re-calibration on a cycle
Scheduled re-calibration and AMC, so the readings stay defensible year after year.
Spares on the shelf
Sensors and boards stocked in India, so a replacement is days away rather than weeks.
Commissioning support
Our engineers set the alarm levels and prove the loop with you on site.
Fixed, portable
or continuous?
The three questions that usually decide the specification.
| Protecting people in an area | Fixed detectors wired to a gas monitor panel, with sounders and interlocks |
|---|---|
| Checking before entry | Portable single or multi-gas detector, bump-tested before each shift |
| Reporting to a pollution board | CEMS on the stack, or online SPM where particulate is the regulated parameter |
| Monitoring the fence line | Ambient air quality station, usually paired with a weather station for dispersion |
| Hazardous area classification | Flameproof housings; tell us the zone and gas group and we will specify the enclosure |
| Data off site | Any of the above via RS485 Modbus into the IoT DataLogger and ArkaWebApp |

Not sure which detector fits?
Send the gas, the range, the area classification and the mounting position. We will specify it and quote it.