Ambient Air
Quality Stations.
Real-time outdoor pollutant monitoring at the fence line and in the surrounding community, collecting atmospheric data around the clock without an operator present.

Diffusion sampling,
calibrated on site.
The station uses diffusion gas detection, where air in the monitored area flows freely into the sensor rather than being drawn through a pump that needs servicing. Advanced four-electrode electrochemistry and optical technology carry the measurement.
Because sensor compatibility and calibration complexity are what usually sink these installations, the station is built for site-specific calibration and minimal maintenance from the start.
Gaseous, particulate
and meteorological.
| Parameter | Range | Resolution |
|---|---|---|
| NO₂ | 0 – 20 ppm | 0.001 ppm |
| SO₂ | 0 – 20 ppm | 0.001 ppm |
| CO | 0 – 100 ppm | 0.001 ppm |
| O₃ | 0 – 5 ppm | 0.001 ppm |
| VOCs | 0 – 20 ppm | 0.001 ppm |
| PM1 / PM2.5 / PM10 / TSP | 0 – 20 mg/m³ | 0.01 µg/m³ |
Carbon dioxide, temperature, humidity, wind speed, wind direction and atmospheric pressure are logged alongside the parameters above.
Electrical and
environmental.
| Work voltage | DC 5 V ±1 % or DC 24 V ±1 % |
|---|---|
| Work current | ≤ 50 mA |
| Response time | < 30 s |
| Detection principle | Electrochemistry |
| Sampling accuracy | ±2 % FS |
| Work humidity | 10 – 95 % RH, non-condensing |
| Work temperature | −20 °C to 70 °C |
| Storage temperature | −40 °C to 70 °C |
| Work pressure | 86 – 106 kPa |
| Warranty | 1 year |
| Service life | 2 years |
Monitoring at the fence line?
Tell us the parameters and how many locations. We will specify the stations and how the data reaches your reports.